[Search] [Mil Spec Materials Store]
Nox-Rust 4101 Petroleum Based Non Staining VCI Corrosion Inhibitor Daubert VCI Nox-Rust 4101 is designed specifically for acid fume inhibition such as in pickling operations and where corrosion protection storage of bare metals in a high humidity environment is required. Passes Ford, MIL-C-16173D Grade 3 and Armco Steel Corp M7C39A tests. Removable. Package: 5 gallons or 55 gallon drums
Mil C-16173 is a solvent cut-back wax-like based amber, translucent, thixotropic liquid corrosion inhibitors. The residual film, after carrier evaporation is highly resistant to salt water and salt spray, provides long-term protection for metallic surfaces in indoor or outdoor exposure and during international shipments.
1. Dry to touch film properties allow protected metal surfaces to be easily handled.
2. Little surface preparation, as Mil C-16173 Grade 4 will adhere to the pre-rusted
3. A thixotropic liquid that is resistant to sag, run-off, and flow.
4. Excellent U.V. resistant, providing optimal outdoor protection without cracking or
chipping of protective films after prolonged exposures to sunlight.
5. Universal protection for ferrous and non-ferrous metals and alloys.
6. The non-conductive film with high resistance and insulating properties effectively
prevents galvanic corrosion between dissimilar metals.
7. Have moistures displacing characteristics.
8. Thermally stable coatings over a broad range of temperature (30ēC - 95ēC).
9. Conforms to the following specifications:
MIL C 0083933A (MR) MIL C 16173D GRADES 1,2,3,4 FORD M 7 C 16A P.O.D. V 5 C 65
10. Mil C-16173 provides high levels of corrosion resistance, up to 24 months
outdoor protection in corrosive environment.
11. Contains penetrating film characteristics.
12. Universal protection for ferrous and non-ferrous metals and alloys.
13. Easy removal by petroleum solvents.
Conforms to MIL C-16173D, Grades 1, 2, 3, and Grade 4 Buy Mil C-16173
Mil-PRF-16173E, Class I is a solvent cutback, firm film, black asphaltic corrosion preventive compound. Mil PRF 16173 E, Grade 1 Class 1 provides long-term protection for metallic surfaces in indoor or outdoor exposure and during international shipments. Approved under Military Specifications MIL-C-16173D, Grade 1, for Class I, MIL-PRF-16173E Class 1 Grade 1 and MIL-P-116J, Type P-1.
Solvent cutback, corrosion preventive compound. The semi-firm film is amber and translucent. Approved under Military Specifications MIL-C-16173E, Grade 2, (Mil PRF-16173E Grade 2) for Class I, and MIL-P-116J, Type P-2. It is designed to protect ferrous and non-ferrous parts for indoor or covered storage and during shipping.
Mil PRF-16173 Rev. E supersedes Mil-C-16173D Grade 2, Class 2 Military Specifications for Corrosion Inhibitor Coating,
Leaves a soft firm, amber color protective film that provides indoor, outdoor sheltered and outdoor packaged corrosion protection for machines, instruments, parts & metal surfaces.
Mil-PRF-16173, Grade 3 Class I is a solvent cutback, water displacing corrosion preventive compound. The dry film is semi-firm, amber and translucent. Approved under Military Specifications MIL-C-16173E, Grade 3, for Class I, and MIL-P-116J, Type P-3. It is designed to protect ferrous and nonferrous precision equipment, parts in indoor or covered storage and during shipment. ASTM D-1748 @ Recommended DFT 4800 hours
MIL-PRF-16173 Grade 3 Class 2 is a solvent cutback, water displacing corrosion preventive compound. The dry film is semi-firm, amber and translucent. Approved under Military Specification Mil-Prf-16173 Rev. E Grade 3 Class 2, MIL-C-16173E, Grade 3, for Class II, and MIL-P-116J, Type P-3. It is designed to protect ferrous and nonferrous
precision equipment, parts in indoor or covered storage and during shipment.
Mil-PRF-16173, Class I is a solvent cutback, water displacing corrosion preventive compound. The dry film is firm, amber, transparent, and non-tacky. Approved under Military Specifications MIL-C-16173E, Grade 4, for Class I, and MIL-P-116J, Type P-19 and MIL PRF-16173E, Grade 4, Class 1 ASTM B-117 1920 HOURS, ASTM D-1748 @ Recommended DFT 1000 HOURS
NOX-RUST X-110 is a wax-based, solvent type, cold applied, corrosion preventative designed for use on ferrous and non-ferrous metals when exposed to indoor or outdoor storage conditions. NOX-RUST X-110 deposits a transparent, firm, wax-like film that is readily removable by conventionally used solvents or degreasing methods. NOX-RUST X-110 is formulated to fulfill the requirements of MIL-C-16173E, Class I Grade #4 Specification.
Protective Properties (Typical Values)
Outdoor Exposure (Uncovered): 1 Year (Min.)
Shed Exposure: 5 Years (Min.)
Salt Spray (ASTM-B-117): 336 Hours (Min.)
Humidity Cabinets (ASTM-D-1748): 1500 Hours (Min.)
NOX-RUST 502 is a petroleum based, solvent type, cold applied rust preventive formulated to fulfill the requirements of MIL-C-16173E Grade #2 Class II Specification. NOX-RUST 502 deposits a grease-like film which gives versatility in application. It is recommended for extended undercover protection of internal or external surfaces of machinery and/or materials with or without use of supplementary barrier materials. It is also applicable for outdoor protection for limited periods, where metal temperatures do not reach levels which produce prohibitive flow of the corrosion preventive film. NOX-RUST 502 is completely miscible with lubricating oils which would eliminate the necessity of coating removal, in some applications.
Corrosion Control Home NATO NSN Products VCI Paper VCI Packaging Corrosion Control Selection Assistance VCI Poly Packaging Mil-Spec Corrosion Inhibitors Mil-Spec Products